I guess the problem was the pnY ssd. I went back and returned it and got a san disk ssd, same size for $10 more and my laptop is back to life!! I was worried I lost everything but luckily I was able to back it up a few weeks ago. Thanks for your tip
It was the pnY ssd. I went back and got a new san disk ssd. That fixed the problem and it restored everything without any issues. I guess the pny ssd just isn't compatible or the one I bought was broken. But thanks for your tip.
Disk Drill can be a lifesaver in situations where you cannot access files due to disk corruption or damage. It can also recover files that have been accidentally deleted or from a disk that was inadvertently formatted. It is definitely worth checking out when faced with the prospect of irretrievable data on a USB or flash drive.
Occasionally, your Mac has already recognized the USB flash drive but not shown it on the desktop. Thus, you should go to Finder > Preferences > General and make sure the \"External disks\" option is ticked. Then you'll see the USB flash drive showing up on Mac desktop.
Finder is the other access for us to check a connected external drive on Mac. If your flash drive or external hard drive is not showing up there, go to Finder > Preferences > Sidebar, and under Locations, you need to tick the option \"External disks\". By selecting this option, we can make sure that the connected external USB hard drive or flash drive will normally show up in the Finder.
Disk reformatting basically solves many hard drive issues, including the not showing up USB, particularly the time when you are able to see the USB icon but files are not showing. USB drive showing empty makes no sense, so you have to reformat the disk and make it usable again.
Why is my USB not readable on Mac False connection, no file system, unsupported disk encryption, and information corruption are all possible to make Mac USB not readable. Here are some of the signs signaling the need to repair USB on Mac:
Check whether Disk Utility detects the USB stick. If the drive is not recognized in Disk Utility and doesn't work with other computers, it most likely has hardware problems. Given that, you should send it to a specialist for further measurement and disk repair.
Did you receive an error message reading, \"the disk you attached was not readable by this computer.\" or \"the disk you inserted was not readable by this computer.\" on Monterey, Big Sur, or another macOS The error also gives you three options: Eject, Ignore, and Initialize.
When a disk experiences file system errors caused by corrupt files, disk integrity corruption, bad sectors, etc., you can't access files on it. Luckily, there's a built-in USB repair tool on Mac called Disk Utility First Aid, which you can employ to scan the corrupted flash drive and fix the damaged file system.
6. You will receive a message reminding you that \"repairing the partition map might erase the disk.\" It usually won't erase data on the USB device, but you can recover files that matter to you first. Type y in the command prompt, then hit Enter.
Hopefully, Terminal managed to repair the corrupted USB drive or General UDisk Media on Mac, and you have regained access. If you still face the USB stick not readable on Mac, reformat the removable disk with Disk Utility (Disk Management on Mac).
If the removable disk has errors First Aid and Terminal cannot repair, reformatting will be the final option. Reformatting restores the USB drive to the original state on Mac by setting up a working file format. But it will also erase all data on it and thus requires data recovery beforehand.
Jessica Shee is a senior tech editor at iBoysoft. Throughout her 3 years of experience, Jessica has written many informative and instructional articles in data recovery, data security, and disk management to help a lot of readers secure their important documents and take the best advantage of their devices.
The file name will be /dev/disk followed by a positive integer. You should also see the phrase (external, physical). For example, my 16 GB flash drive produces the output shown below. So the file name is /dev/disk2.
I had a similar problem with a Sandisk 32GB SD card. I solved it with the Windows management disk. I erased all partitions of the disk and then created a fat32. Initially no drive letter was assigned but then from My Computer, format the drive without problems.My SD card had this problem after using it for a raspberry pi.
Sometimes your Mac detects the USB drive but doesn't show it on the desktop. Hence, you ought to go to Finder > Preferences > General and ensure the \"External disks\" option is ticked. At that point, you'll see the USB drive appearing on the Mac.
The Secondary Storage Test is a subtest under Futuremark's larger PCMark 7 benchmarking suite. It employs a different approach to drive testing than pure speed tests like AS-SSD, which we'll get to in a moment. PCMark 7 runs a series of scripted tasks typical of everyday PC operation and disk accesses. It measures app launches, video-conversion tasks, image import, operations in Windows Media Center, and more. The result is a proprietary numeric score; the higher the number, the better.
The AS-SSD benchmark utility is designed specifically to test solid-state drives (as opposed to traditional hard drives). It reports a variety of scores, but the ones we are reporting in these two charts following measure a drive's ability to read and write large files. Drive makers often quote these speeds, as a theoretical maximum, on the packaging or in advertising.
Sequential speeds are important if you're working with very large files for image or video editing, or you play lots of games with large levels that take a long time to load with traditional hard drives. Again, we secure-erase all SSDs using the utility Parted Magic before running this test.
Anvil's Storage Utilities is a recent addition to our testing suite, and we'll report here the Overall Score, which is derived from the Anvil Read and Write scores with the utility run at default settings.
Widely used SSD benchmarking utility that uses incompressible data to simulate the worst possible scenario for an SSD, thus giving a much lower sequential read and write speed result than manufacturer stated by as a result of the heavy workload.
The most frequently used benchmarking utility by many manufacturers for performance specifications. As ATTO Disk Benchmark uses compressible data rather than incompressible data, it results in higher benchmark scores.
I'm in too. But my case is a little bit different and I don't see how can I apply any patch.I try to install Linux Mint 18.1 with my brand new Kingston 256GB SSD. When I check the SSD with Disks it's OK, but the utility shows 100 Celsius temperature.Then I begin the installation, choose partitions and try to move on. The Installer crashes with Error 5.Is it possible to apply the patch in such a case How am I to do it I use USB live cd.
If your USB disk gets this error on Windows computer, you may think the USB drive is broken and unable to use. The flash drive becomes a read-only situation, and you cannot manage data on it, like copying, deleting or writing the files on the disk. How to remove the write protection from a read-only flash drive On the next guide, we will show you how to disable write protection from flash drive, SD card or pen drive in Windows 10/8/7.
If you're working on a Mac computer, you also will receive the \"Read Only\" error on the external drive. On the following steps, we will show you how to disable write protection disk on Mac.
Tina is a technology enthusiast and joined MiniTool in 2018. As an editor of MiniTool, she is keeping on sharing computer tips and providing reliable solutions, especially specializing in Windows and files backup and restore. Besides, she is expanding her knowledge and skills in data recovery, disk space optimizations, etc.
USB flash drives hold everything from personal and medical information to music and pictures and even secure data, with the added advantage of being small and rugged enough for keychain duty.USB Disk Storage Format Tool utility allows you to quickly and thoroughly format virtually any USB flash drive with your choice of FAT, FAT32, exFAT, or NTFS partition types.
Quick format and safe format.Erase all data and delete space on flash drives that cannot be removed in the traditional way.Remove any tracks of malicious software that may have infected it. Correct partition errors if any. Create volume label for USB disk drives. Scan drive for errors before formatting.Create a FAT32 volume larger than 32 GB.Tested with thousands of flash drives (Compact Flash, CF Card II, Memory Stick Duo Pro, SDHC, SDXC, Thumb Drive, Pen Drive) of the following brands, SanDisk, Kingston, Transcend, Corsair, HP, Sony, Lexar, Imation, Toshiba, PNY, ADATA, Verbatim, LaCie, Panda, Seatech, SDKSK9, Silicon Power, IronKey, and HDE.
Both Windows and Mac have disk manager applications that let users examine the properties of storage devices. Go to Disk Management in Windows or Disk Utility in Mac and see if your drive is showing up.
Unfortunately, if you can't see the drive at all in your disk management utility, there's a good chance that it simply needs to be replaced. If your drive does pop up, you'll be able to view key information such as your flash drive size and the file system it's formatted in.
You'll find some handy troubleshooting tools in the disk management utility as well. In Windows Disk Management, be sure to check whether your drive needs a new volume letter. Mac Disk Utility, meanwhile, includes a feature called First Aid that scans your drive for errors and gives you tools to correct them automatically. 153554b96e