PS3: for easycap in device manager, you can either change to the default driver for easyCAP or you can use Easycap driver that you found here: http://sourceforge.net/projects/easycap/files/easycap_usb_v2.0/
PS4: for easycap in device manager, you can either change to the default driver for easyCAP or you can use Easycap driver that you found here: http://sourceforge.net/projects/easycap/files/easycap_usb_v2.0/
PS2: if you copy paste the drivers you find here http://sourceforge.net/p/easycap/mailman/message/29041784/ on a usb stick, and plug it on your computer, it will use the easycap drivers instead of the automatically assigned Microsoft drivers. To do this, create an exe file and after copy paste the drivers you find here, click on the exe file and change the default device for easyCAP.
PS5: before you change the default for easyCAP, you can do a simple test to see if the drivers are working. Open easycap in the start menu, then click the green check mark to check that you can use easycap in easycap. You should see the screen in the picture on this page http://easycap.sourceforge.net/usb.html.
I have a Sony HD-DVR A100 record (with a USB to firewire device) that I connect to this video capture device. I have tried connecting the A100 directly to the EasyCAP and it worked fine, the quality however was very poor. After I connected it to the Sony DVR to give it a try, the driver registered the A100 perfectly and the video quality was at a much higher standard, but the audio was all missing. As before I tried both the Easier Cap and the Easier CAP driver, but to no avail.
Hi,When i plug-in easyCAP, my computer (with windows 10) see it as USB2.0 PC Camera in device manager and assigns a Microsoft driver.Then the system do not allow to change it to any other driver provided within this page. When i remove and replug, same is happening. Please advise how to use easycap drivers instead of automatically assigned Microsoft drivers.
I am running a PC with Windows 7 and Adobe Photoshop CS6. I am wondering how to end the trial period and convert to a full copy of Photoshop CS6. I tried closing down Photoshop, which produced a message telling me to return the disk. I did that, but the same message returned. How can I end this?
Hi Dave,I was able to get my English Indesign CS6 to switch to German. But there is one Problem. The moment I startet Indesign there is the error message that my trial version ends soon altough I bougt a regular Version with correct serial number by an adobe seller. Can anybody help me? 827ec27edc